Food Safety Compliance Checklist for Australian Food Businesses
A complete food safety compliance checklist for Australian food businesses: temperature, cleaning, allergens, records, supervisor, pest, chemicals and inspection readiness.
A practical, Australia-wide food safety compliance checklist you can use as a self-audit before a council inspection. It's grouped by the areas an environmental health officer actually looks at — temperature, cleaning, allergens, records, people, premises, pest and chemicals. It's general guidance aligned with the Food Standards Code; confirm anything state-specific (registration, Food Safety Supervisor rules, fees) with your council or regulator. For a generated, editable version use the free audit checklist generator . Reviewed by Prakash Bartaula, Founder, FoodSafety HQ. Last reviewed 10 November 2026. Temperature control. Cold potentially hazardous food held at 5°C or below. Hot food held at 60°C or above. Fridge, freezer and cool-room temperatures checked and recorded regularly. Cooked food cooled using the two-stage rule (60→21°C in 2 hours, 21→5°C in a further 4). Cooking and reheating reach a safe core temperature and are checked with a probe. A clean, calibrated probe thermometer is available and used. Cleaning and sanitising. A written cleaning schedule covers all areas and equipment, with who and how often. Surfaces are cleaned first, then sanitised, with the correct contact time. Sanitiser is made up to the right concentration and cleaning records are kept. Cloths, sponges and equipment are managed so they don't spread contamination. Handwash basins are stocked (warm water, soap, single-use drying) and used only for hands. Allergens. A per-dish allergen matrix is available and current for the menu. Staff know how to answer an allergen request accurately. Cross-contact controls are in place (separate equipment, clean-down, storage). Packaged food carries correct PEAL allergen labelling. Records and management. Temperature, cleaning, delivery and corrective-action records are kept and up to date. Corrective actions are recorded when a control fails. Records are available on request (digital records are widely accepted). A food safety program or the Standard 3.2.2A tools are in place as required. People and training. A Food Safety Supervisor is appointed where required, with a current certificate on site. Food handlers have the skills and knowledge for their role. Sick staff are kept away from food handling per the health-and-hygiene rules. Good personal hygiene: handwashing, clean uniforms, no bare-hand contact with ready-to-eat food where required. Premises, pest and chemicals. The premises and equipment are maintained, clean and in good repair. A pest-control program is in place with monitoring and records; no signs of pest activity. Cleaning chemicals are stored away from food and labelled; Safety Data Sheets are accessible. Approved suppliers and delivery checks support one-step-back traceability. Waste is managed and removed so it doesn't contaminate food. Inspection readiness. Before an inspection, walk the checklist above as a self-audit, fix anything open, and make sure your records are easy to produce. For the full method see how to prepare for a council food inspection and how to run an internal audit . If you do receive a notice, see responding to an improvement notice . What is a food safety compliance checklist? It's a structured self-audit of the areas a food safety inspection covers — temperature, cleaning, allergens, records, people, premises, pest and chemicals — so you can find and fix gaps before an environmental health officer does. Use it regularly, not just before an inspection. How often should I do a food safety self-audit? A good rhythm is a quick daily check of the core controls (temperatures, cleaning, allergens) plus a fuller self-audit against the complete checklist monthly, and again before any expected inspection. Recording the results shows a history of control. Does this checklist meet my state's requirements? It's general guidance aligned with the national Food Standards Code and covers what inspections commonly assess, but registration, Food Safety Supervisor rules, fees and some specifics vary by state, territory and council. Confirm the detail for your business with your local council or state regulator. Can I get an editable or downloadable version? Yes. The free audit checklist generator produces an editable checklist you can tailor to your venue, and FoodSafety HQ can run these checks as daily digital tasks with the records kept automatically.
Frequently asked questions
What is a food safety compliance checklist?
It's a structured self-audit of the areas a food safety inspection covers — temperature, cleaning, allergens, records, people, premises, pest and chemicals — so you can find and fix gaps before an environmental health officer does. Use it regularly, not just before an inspection.
How often should I do a food safety self-audit?
A good rhythm is a quick daily check of the core controls (temperatures, cleaning, allergens) plus a fuller self-audit against the complete checklist monthly, and again before any expected inspection. Recording the results shows a history of control.
Does this checklist meet my state's requirements?
It's general guidance aligned with the national Food Standards Code and covers what inspections commonly assess, but registration, Food Safety Supervisor rules, fees and some specifics vary by state, territory and council. Confirm the detail for your business with your local council or state regulator.
Can I get an editable or downloadable version?
Yes. The free audit checklist generator produces an editable checklist you can tailor to your venue, and FoodSafety HQ can run these checks as daily digital tasks with the records kept automatically.